7t SMP-1200 Modular Bridge Deck Finisher for 12–16m Wide Concrete Construction

The SMP-1200 Modular Bridge Deck Finisher is designed for contractors who need one machine to handle different large-width concrete finishing projects. Its modular truss structure allows the working width to be configured for different site requirements, while the machine integrates vibration, slurry lifting and roller finishing.

With a paving width of 12-16 m, paving speed of 0-5 m/min and a total power range of 20-29 kW, SMP-1200 is designed for large-area concrete construction. The machine weighs approximately 7 t at a 15 m working width, while its 300 L water tank and optional water spray system support continuous construction and equipment cleaning.

• Modular Truss Design: The truss uses a modular structure that can be assembled according to required working width.
• Wide Working Range: A 12-16 m paving width makes the machine suitable for large concrete structures.
• High-Frequency Vibration: The vibration system helps improve concrete distribution and slurry lifting.
• Large-Diameter Finishing Roller: The 219 mm roller operates at 240 rpm for continuous finishing.
• Flexible Traveling System: Rubber or steel wheel configurations can be selected according to site conditions.
• Optional Automatic Control: Digital sensors, laser leveling and 3D control can be selected for projects requiring additional elevation control.

Construction contractors may work on bridge decks with different widths and site conditions. Purchasing separate equipment for every width can increase equipment investment and reduce fleet utilization.

For contractors looking for a flexible concrete finishing machine, a modular system can provide a more adaptable equipment solution. The SMP-1200 is designed with this requirement in mind.

The SMP-1200 uses a modular truss concept that can be configured for different working widths. This gives contractors more flexibility when planning equipment for different bridge and concrete projects.

The integrated vibration and roller finishing system also reduces the need to coordinate several separate finishing operations. Optional digital and laser-based control technologies can be added when project specifications require more precise elevation management.

• Bridge deck concrete construction
• Highway bridge projects
• Wide concrete slabs
• Large-area concrete surface finishing
• Concrete road construction
• Projects requiring flexible working widths

Choose SMP-1200 when your project requires a 12-16 m working width and continuous concrete surface finishing.

If the project has different working widths, discuss the modular truss configuration before ordering. If elevation accuracy is critical, select digital sensor, laser or 3D control options. For projects in different climates, confirm the appropriate configuration with the manufacturer before shipment.