Multi-Application SMC-5000 Slipform Paver for Concrete Curbs, Ditches and Roadside Structures

Product Overview

The SMC-5000 is a medium-sized three-track concrete slipform paver designed for curbs, drainage ditches, barriers, road shoulders and rural road construction. One of its key advantages is its multi-mold and multi-application capability, supporting both side-mold and center-mold configurations. Continuous slipform paving reduces the need for traditional formwork and helps contractors achieve efficient and consistent concrete forming.

Product Features

1. Multi-Mold Configuration

The SMC-5000 supports side-mold and center-mold configurations. The side mold is suitable for curbs, drainage ditches and roadside structures, while the center mold can be used for selected road and concrete applications.

2. Hydraulic Mold Adjustment

The mold position can be adjusted by hydraulic cylinders, helping reduce positioning time and adapt to different working conditions.

3. Three-Track Traveling System

The full hydraulic drive and three-track traveling system provide stable movement during concrete paving operations.

4. Adjustable Feeding System

The auger feeding system allows adjustment of its tilt angle and front/rear position according to site conditions.

5. Efficient Vibration System

The hydraulic vibration system has 5 standard vibrator circuits, with 6- or 8-circuit options available. The vibration frequency can reach up to 167 Hz.

Cause

Road construction projects often involve long continuous sections of curbs, drainage channels and roadside concrete structures. Traditional formwork construction requires repeated installation and removal, which can increase labor requirements and reduce construction efficiency.

Solution

The SMC-5000 addresses these requirements by continuously forming fresh concrete through slipform technology. Different molds can be configured for different structures, while the full hydraulic drive and three-track system provide stable operation.

Specifications

Application

• Concrete Curbs
• Drainage Ditches
• Road Shoulders
• Concrete Barriers
• Rural Roads
• Municipal Roads

How It Works

Concrete is delivered to the molding area through the auger feeding system. Hydraulic vibration compacts the concrete while the machine moves forward. The slipform mold continuously shapes the concrete into the required structure.

FAQ

Q1: Can the SMC-5000 pave both curbs and drainage ditches?
Yes. Different mold configurations can be selected according to the project.

Q2: What is the maximum paving width?
Up to 2500 mm with side mold and 3000 mm with center mold.

Q3: Is the mold adjustable?
Yes. Hydraulic cylinders allow convenient mold positioning.

Q4: What is the maximum vibration frequency?
Up to 167 Hz.