Three-Track Slipform Paver | 0–2500mm Side / 0–3000mm Center Paving for Curbs, Gutters & Rural Roads

The SMC-5000 Three-Track Slipform Paver is a medium-sized concrete slipform paving machine developed for contractors working on curbs, drainage channels, sidewalks, rural roads and other concrete structures. The machine supports both side-mold and center-mold paving modes, allowing one machine to handle different construction requirements by changing the mold configuration.

With a full hydraulic drive system, three-track walking structure, adjustable mold positioning and hydraulic track offset function, the SMC-5000 provides stable operation and flexible paving performance on different jobsites. Its paving width reaches 0–2500 mm in side-mold mode and 0–3000 mm in center-mold mode, while the maximum paving height is 1100 mm.

For African infrastructure contractors, the SMC-5000 offers a practical solution for projects where traditional formwork requires significant labor and construction time. Customized molds can be designed according to the required concrete profile, helping contractors improve construction efficiency while maintaining consistent dimensions and surface quality.

Many road and infrastructure contractors still use traditional formwork to construct concrete curbs, drainage channels and other linear structures. Although this method can be applied to different projects, it often requires repeated form installation, concrete pouring, vibration, surface finishing and form removal.

For long-distance road projects, these repeated operations can increase labor requirements and extend the construction cycle. Maintaining consistent dimensions along hundreds or thousands of meters can also become difficult when construction relies heavily on manual work.

African infrastructure projects may involve long rural roads, highways, municipal roads, drainage systems and agricultural infrastructure. Contractors therefore need equipment that can provide continuous concrete forming, flexible mold configuration and stable movement while adapting to different site conditions.

The SMC-5000 was developed to address these requirements. Its three-track structure, hydraulic drive and adjustable mold system provide a mechanized alternative to conventional fixed-form construction.

The SMC-5000 combines concrete feeding, distribution, vibration and slipform shaping into a continuous construction process.

Its most important advantage is the multiple mold configuration. The machine can operate with side molds for curb, gutter and barrier-type structures, while the center-mold configuration can be used for suitable concrete structures such as low-grade rural road surfaces, sidewalks and agricultural irrigation channels.

The hydraulic mold positioning system allows the mold position to be adjusted according to site requirements. The right rear track also has a hydraulic offset function, which helps adjust track spacing and facilitates transportation while increasing the available paving width in center-mold applications.

The feeding system is adjustable. The auger feeding device can change its tilt angle and front/rear position through hydraulic cylinders to adapt to different concrete feeding conditions. The feeding belt is also available as an option.

The machine uses a full hydraulic drive system and hydraulic vibration technology. The standard configuration provides 5 vibrator circuits, while 6- or 8-circuit configurations are available according to project requirements. The vibrator frequency can be adjusted from 0 to 167 Hz.

*Actual machine weight depends on the selected configuration.

The SMC-5000 is designed for a wide range of concrete infrastructure applications.

With a customized side mold, the machine can continuously form concrete curbs along roads, residential developments and municipal projects.

The machine can be configured with suitable molds for roadside gutters and drainage structures, reducing the need for repeated temporary formwork.

The center-mold configuration can be used for suitable low-grade rural concrete road construction.

The machine can be configured for appropriate sidewalk dimensions, providing continuous concrete forming for long linear projects.

Customized molds can be used for suitable irrigation channel profiles.

The SMC-5000 can be used for suitable concrete roadside structures and related highway construction applications.

The SMC-5000 uses a continuous slipform paving process.

Step 1 — Concrete Feeding

Fresh concrete is supplied to the machine's feeding system.

Step 2 — Concrete Distribution

The auger distributes concrete evenly toward the slipform mold.

Step 3 — Hydraulic Vibration

The vibration system compacts the concrete to improve forming quality.

Step 4 — Slipform Extrusion

The customized mold continuously shapes the concrete into the required profile.

Step 5 — Continuous Walking

The three-track hydraulic drive moves the machine forward at a controlled paving speed.

Step 6 — Profile Formation

The finished concrete structure is continuously formed behind the machine without conventional fixed formwork.

Before purchasing a slipform paver, contractors should first define the concrete structure and project requirements.

Provide:

• Width
• Height
• Thickness
• Cross-section drawing

The mold should be designed according to the actual finished concrete profile.

Side Mold:
Recommended for suitable curbs, gutters, barriers and roadside concrete structures.

Center Mold:
Suitable for applicable road, sidewalk and other central paving applications.

SMC-5000 provides:

0–2500 mm side-mold paving width

0–3000 mm center-mold paving width

The standard configuration uses 5 vibrator circuits. Projects requiring different concrete profiles can be configured with 6 or 8 circuits.

For African projects, provide information about:

• Road conditions
• Terrain
• Concrete supply method
• Daily paving requirements
• Project length
• Climate and working environment

Our engineering team can recommend the appropriate machine and mold configuration based on the project.

The three-track structure provides stable machine movement and supports continuous slipform paving.

Side-mold and center-mold configurations allow the machine to adapt to different concrete construction requirements.

Hydraulic mold positioning helps operators adjust the working mechanism according to site requirements.

The rear track offset function facilitates transportation and provides greater flexibility for center-mold applications.

5 vibrator circuits are standard, with 6- and 8-circuit configurations available.

Customized molds allow contractors to use one machine for different concrete structures.

The SMC-5000 can be used for suitable concrete curbs, gutters, drainage channels, sidewalks, rural roads, agricultural irrigation channels and other customized concrete structures.

The paving width is 0–2500 mm with side-mold configuration and 0–3000 mm with center-mold configuration.

Yes. The SMC-5000 is designed for multiple mold configurations. Customized molds can be developed according to the required concrete profile.

The standard configuration has 5 vibrator circuits, while 6- and 8-circuit configurations are also available.

The SMC-5000 is designed for concrete infrastructure construction and can be configured according to different project requirements. For an accurate recommendation, customers should provide the concrete profile, paving width, height, project application and site conditions.

Planning a road curb, drainage gutter, rural road, sidewalk or concrete channel project in Africa?

Send us your concrete profile drawing, required paving width and application, and our engineering team can recommend the appropriate SMC-5000 configuration and customized slipform mold.