SMC-5000 Three-Track Slipform Paver for Concrete Curbs, Drainage Ditches & Roadside Construction

Product Overview

The SMC-5000 is a medium-sized three-track concrete slipform paver designed for curb, drainage ditch, roadside, barrier and rural road construction. It supports both side-mold and center-mold paving configurations, allowing contractors to adapt the machine to different concrete structures. Compared with traditional formwork and manual construction, the SMC-5000 integrates concrete feeding, vibration and slipform molding into a continuous process, helping improve construction efficiency, reduce labor requirements and achieve consistent concrete forming quality.

Cause

Traditional curb and drainage construction often requires repeated setting-out, formwork installation, concrete placement and formwork removal. For long-distance road projects, this process can increase labor costs, construction time and quality-control challenges.

Solution

The SMC-5000 uses full hydraulic drive and crawler traveling technology for stable movement during concrete forming. Its side-mold configuration is suitable for curbs, drainage ditches and roadside structures, while the center-mold configuration can be used for selected road and concrete applications. Hydraulic mold adjustment helps operators adapt the machine to different construction conditions.

Specifications

Application｜应用场景

The SMC-5000 can be applied to highway shoulders, concrete drainage ditches, curbs, barriers, rural roads, urban roads and other concrete structures. It is particularly suitable for projects requiring continuous construction, reduced formwork use and stable concrete forming quality.

How It Works

Concrete is fed into the paving area and distributed into the mold. The vibration system compacts the concrete while the machine moves forward at a controlled speed. The slipform mold continuously shapes the fresh concrete into the required curb, ditch or roadside structure.

How To Choose

1. Required concrete structure width and height
2. Side-mold or center-mold configuration
3. Required construction speed
4. Concrete supply and feeding conditions
5. Project road condition and working environment

For narrower curb and small-section applications, smaller slipform pavers such as the SMC-521 or SMC-523 may be more suitable. For larger structures, the SMC-5000 provides a wider working range and stronger construction capability.

FAQ

Q1: What can the SMC-5000 pave?
It can be used for concrete curbs, drainage ditches, barriers, roadside structures and selected road applications.

Q2: Can the mold be changed?
Yes. The machine supports different mold configurations according to project requirements.

Q3: What is the maximum paving width?
The paving width is up to 2500 mm with side mold and 3000 mm with center mold.

Q4: What is the vibration frequency?
The vibration frequency is adjustable from 0 to 167 Hz, helping adapt to different concrete conditions.

Q5: Is the SMC-5000 suitable for African road projects?
Yes. Its crawler traveling system, hydraulic drive and flexible mold configuration make it suitable for various road and concrete construction environments.